big promation 2.4g rf e27 6w rgb + white dimmable smd 5630 ac85-265v led globe bulb
- Model: lighting-6556
(5reviews)
( today,deliverd around 11/10/2022)
Item specifics
Brand Name: Brand New Occasion: living room Base
Type: E27 Voltage: 220V Color Temperature: Warm White (2700-3500K) Beam Angle(°): 360° LED Chip Model: SMD5730 Number of LED Chip: 26 pcs Led Bulb
Type: Bubble Ball Bulb Average Life (hrs): 50000 Shape: Bar Power Tolerance: 5% Item
Type: LED Bulbs Length: 12.2cm Color: Sliver
Specification:
The RGBW bulb is with RGB and white. It can be controlled by four different zones, different programs, dimming / brightening and changing the color you ke.
The package is only with a RGBW LED bulb, the remote control is not included. If you would ke the remote control, you could have a look at the 2.4G RF RGBW Remote Control .
Connector E27 Type Globe Bulb Light Color RGB+White Material Aluminum Bulb Features Dimmable Specific Uses Indoor use only Wattage (W) 6 Voltage (V) AC 85-265V 50-60HZ LED Quantity 26 Light Source SMD 5630 Beam Angle 180° Dimension (mm) 122 x 60
Description:
1. WiFi controller, effective receiving distance nearly 30m.
2. Heat radiation. Sod State. Shockproof and vibration proof
3. Eco-Friendly.CE RoHS compant. No lead . No UV or IR Radiation.
4. Reduce re-lamp frequency. Lifespan is over 30000 hrs. Save effort and maintenance costs on changing bulbs frequently.
5. Easy Installation. Can be easily fitted instead of ordinary incandescent or CFL ght bulbs. Have fun and enjoy the ght.
Programs:
Program 1 (RGB Fade In Fade Out )
This program fades in and fades out the color red, green, blue, and white one after anther .
Program 2 (Color Flash )
In this program, red, green, blue, white, yellow, purple flashes to change .
Program 3 (Disco)
Different colors strobe and flash to change
Program 4 (Red color Ramp up and flash)
In this program, red color brightens from 0%-100% and shuts down. then flashes three times.
Program 5 (Green color Ramp up and flash)
In this program, green color brightens from 0%-100% and shuts down, then flashes three times.
Program 6 (Blue color Ramp up and flash)
In this program, blue color brightens from 0%-100% and shuts down, then flashes three times.
Program 7 (Color Change+Flash)
Here several colors fade into each other and then flash randomly.
Program 8 (Fade in and Fade out)
Here different color fade into each other.
Program 9 (Strobe White )
Just white color flashes up.
>Basic control functions(As shown on the right picture)
Long press "Master ON/ZONE ON" button,you can get the white mode.
Touch the color ring ,you can get any color
And you can change the brightness by the brightness ring+ -.
Programs:
Program 1 (RGB Fade In Fade Out )
This program fades in and fades out the color red ,green ,blu ,and white one after anther .
Program 2 (Color Flash )
In this program ,red ,green ,blue ,white ,yellow ,purple flashes to change .
Program 3 (Disco)
Different colors strobe and flash to change
Program 4 (Red color Ramp up and flash)
In this program ,red color brightens from 0%-100% and shuts down .then flashes three times.
Program 5 (Green color Ramp up and flash)
In this program,green color brightens from 0%-100% and shuts down,then flashes three times.
Program 6 (Blue color Ramp up and flash)
In this program,blue color brightens from 0%-100% and shuts down,then flashes three times.
Program 7 (Color Change+Flash)
Here several colors fade into each other and then flash randomly.
Program 8 (Fade in and Fade out)
Here different color fade into each other.
Program 9 (Strobe White )
Just white color flashes up.
Tips:
To dim all RGBW ghts at once or change the color ,first press "Master ON".Todo this with individual ghts .first press "Zone ON",Secondly,choose the color brightness or brightness according to the color ring or brightnessring.
>Linking & unnk the ght
Linking new ghts to the remoute control
1.Choose which zone you want to assign the ght (1 to 4)
2.Switch off the main power supply of the ght in the selected zone with the main switch or pull the plug from the socket.
3.Now switch on the ght again and within 3 seconds shortly press one of the "Zone ON" buttons one time on the remote conctrol.
4.When this nk operation is successful ,the ght slowly bnks 3 times on and off.
Unnking the ghts:
1.Check via the remote the control to see which zone (1 to 4) is already nked to a ght.
2. Switch off the main power supply of the ght with the main switch or pull the plug from the socket.
3.Now switch on the ght again within 3 seconds press 5 times quickly and shortly on one of the "Zone ON" buttons which you want to nk.
4.When this unnk operation is succesful,the ght quickly bnks 6 times on and off.
Grouping of several ghts
You can add an endless numbers of ghts to a zone on the 4 channel remote by nking the ghts to different zones.This way you are completely flexible in creating different group combinations .Below you can see some grouping examples.
Kind remind:
we recommend using rechargeable batteries for the remote controls.For that reason,we don't include ordinary batteries.We hope you appreciate our environmental friendly choices and they do not cause you any inconvenience.
Instruction:
Safety Guide:To reduce the risk of electric shock, please ensure the ght socket if turned off at the wall ght switch before replacing ght bulbs.
Bulb and Wireless Remote/App Installation:
1. Battery Installation:Please take the remote control and carefully press the battery cover and push it away in a downward motion.
2. App installation:Download and finish the installation of the iOS or Android App as per Wifi Controller User Installation
3. LED Bulb Installation:
·Take the led bulb out of the packaging, holding it only by the acryc lens.
·Switch off the power at the wall or lamp switch before installation.
·Replace the original ght bulb with the new Wireless Smart LED Bulb.
·Switch on the power, the led bulb will ght under normal circumstances.
·If the bulb does not sync, then firstly clear the previous channel as per Unnking the ghts (from the RGBW Remote Control User Instruction). - See more at: http://www.eachine.com/ThorFire-Touch-Remote-Control-Color-Changing-LED-Blub-RGBW-Dimmable-Light-Samsung-Chips-E27-6W%2850W%29-Model-G1-p-25.html?utm_design=13&utm_source=emailvision&utm_medium=Mail_eachine02_all&utm_campaign=newsletter&utm_content=Echo#sthash.zCvlR1P9.dpuf >Basic control functions(As shown on the right picture)
Long press "Master ON/ZONE ON" button,you can get the white mode.
Touch the color ring ,you can get any color
And you can change the brightness by the brightness ring+ -.
Programs:
Program 1 (RGB Fade In Fade Out )
This program fades in and fades out the color red ,green ,blu ,and white one after anther .
Program 2 (Color Flash )
In this program ,red ,green ,blue ,white ,yellow ,purple flashes to change .
Program 3 (Disco)
Different colors strobe and flash to change
Program 4 (Red color Ramp up and flash)
In this program ,red color brightens from 0%-100% and shuts down .then flashes three times.
Program 5 (Green color Ramp up and flash)
In this program,green color brightens from 0%-100% and shuts down,then flashes three times.
Program 6 (Blue color Ramp up and flash)
In this program,blue color brightens from 0%-100% and shuts down,then flashes three times.
Program 7 (Color Change+Flash)
Here several colors fade into each other and then flash randomly.
Program 8 (Fade in and Fade out)
Here different color fade into each other.
Program 9 (Strobe White )
Just white color flashes up.
Tips:
To dim all RGBW ghts at once or change the color ,first press "Master ON".Todo this with individual ghts .first press "Zone ON",Secondly,choose the color brightness or brightness according to the color ring or brightnessring.
>Linking & unnk the ght
Linking new ghts to the remoute control
1.Choose which zone you want to assign the ght (1 to 4)
2.Switch off the main power supply of the ght in the selected zone with the main switch or pull the plug from the socket.
3.Now switch on the ght again and within 3 seconds shortly press one of the "Zone ON" buttons one time on the remote conctrol.
4.When this nk operation is successful ,the ght slowly bnks 3 times on and off.
Unnking the ghts:
1.Check via the remote the control to see which zone (1 to 4) is already nked to a ght.
2. Switch off the main power supply of the ght with the main switch or pull the plug from the socket.
3.Now switch on the ght again within 3 seconds press 5 times quickly and shortly on one of the "Zone ON" buttons which you want to nk.
4.When this unnk operation is succesful,the ght quickly bnks 6 times on and off.
Grouping of several ghts
You can add an endless numbers of ghts to a zone on the 4 channel remote by nking the ghts to different zones.This way you are completely flexible in creating different group combinations .Below you can see some grouping examples.
Kind remind:
we recommend using rechargeable batteries for the remote controls.For that reason,we don't include ordinary batteries.We hope you appreciate our environmental friendly choices and they do not cause you any inconvenience.
Instruction:
Safety Guide:To reduce the risk of electric shock, please ensure the ght socket if turned off at the wall ght switch before replacing ght bulbs.
Bulb and Wireless Remote/App Installation:
1. Battery Installation:Please take the remote control and carefully press the battery cover and push it away in a downward motion.
2. App installation:Download and finish the installation of the iOS or Android App as per Wifi Controller User Installation
3. LED Bulb Installation:
·Take the led bulb out of the packaging, holding it only by the acryc lens.
·Switch off the power at the wall or lamp switch before installation.
·Replace the original ght bulb with the new Wireless Smart LED Bulb.
·Switch on the power, the led bulb will ght under normal circumstances.
·If the bulb does not sync, then firstly clear the previous channel as per Unnking the ghts (from the RGBW Remote Control User Instruction). - See more at: http://www.eachine.com/ThorFire-Touch-Remote-Control-Color-Changing-LED-Blub-RGBW-Dimmable-Light-Samsung-Chips-E27-6W%2850W%29-Model-G1-p-25.html?utm_design=13&utm_source=emailvision&utm_medium=Mail_eachine02_all&utm_campaign=newsletter&utm_content=Echo#sthash.zCvlR1P9.dpuf Instruction:
Safety Guide:To reduce the risk of electric shock, please ensure the ght socket if turned off at the wall ght switch before replacing ght bulbs.
·Take the led bulb out of the packaging, holding it only by the lens.
·Switch off the power at the wall or lamp switch before installation.
·Replace the original ght bulb with the new Wireless Smart LED Bulb.
·Switch on the power, the led bulb will ght under normal circumstances.
Package Included:
1 x 2.4G RF 6W RGBW LED Bulb (not included remote control)
Product Description
Packaging Details Unit
Type: piece
Package Weight: 0.200kg (0.44lb.)
Package Size: 15cm x 10cm x 10cm (5.91in x 3.94in x 3.94in)
Brand Name: Brand New Occasion: living room Base
Type: E27 Voltage: 220V Color Temperature: Warm White (2700-3500K) Beam Angle(°): 360° LED Chip Model: SMD5730 Number of LED Chip: 26 pcs Led Bulb
Type: Bubble Ball Bulb Average Life (hrs): 50000 Shape: Bar Power Tolerance: 5% Item
Type: LED Bulbs Length: 12.2cm Color: Sliver
Specification:
The RGBW bulb is with RGB and white. It can be controlled by four different zones, different programs, dimming / brightening and changing the color you ke.
The package is only with a RGBW LED bulb, the remote control is not included. If you would ke the remote control, you could have a look at the 2.4G RF RGBW Remote Control .
Connector E27 Type Globe Bulb Light Color RGB+White Material Aluminum Bulb Features Dimmable Specific Uses Indoor use only Wattage (W) 6 Voltage (V) AC 85-265V 50-60HZ LED Quantity 26 Light Source SMD 5630 Beam Angle 180° Dimension (mm) 122 x 60
Description:
1. WiFi controller, effective receiving distance nearly 30m.
2. Heat radiation. Sod State. Shockproof and vibration proof
3. Eco-Friendly.CE RoHS compant. No lead . No UV or IR Radiation.
4. Reduce re-lamp frequency. Lifespan is over 30000 hrs. Save effort and maintenance costs on changing bulbs frequently.
5. Easy Installation. Can be easily fitted instead of ordinary incandescent or CFL ght bulbs. Have fun and enjoy the ght.
Programs:
Program 1 (RGB Fade In Fade Out )
This program fades in and fades out the color red, green, blue, and white one after anther .
Program 2 (Color Flash )
In this program, red, green, blue, white, yellow, purple flashes to change .
Program 3 (Disco)
Different colors strobe and flash to change
Program 4 (Red color Ramp up and flash)
In this program, red color brightens from 0%-100% and shuts down. then flashes three times.
Program 5 (Green color Ramp up and flash)
In this program, green color brightens from 0%-100% and shuts down, then flashes three times.
Program 6 (Blue color Ramp up and flash)
In this program, blue color brightens from 0%-100% and shuts down, then flashes three times.
Program 7 (Color Change+Flash)
Here several colors fade into each other and then flash randomly.
Program 8 (Fade in and Fade out)
Here different color fade into each other.
Program 9 (Strobe White )
Just white color flashes up.
>Basic control functions(As shown on the right picture)
Long press "Master ON/ZONE ON" button,you can get the white mode.
Touch the color ring ,you can get any color
And you can change the brightness by the brightness ring+ -.
Programs:
Program 1 (RGB Fade In Fade Out )
This program fades in and fades out the color red ,green ,blu ,and white one after anther .
Program 2 (Color Flash )
In this program ,red ,green ,blue ,white ,yellow ,purple flashes to change .
Program 3 (Disco)
Different colors strobe and flash to change
Program 4 (Red color Ramp up and flash)
In this program ,red color brightens from 0%-100% and shuts down .then flashes three times.
Program 5 (Green color Ramp up and flash)
In this program,green color brightens from 0%-100% and shuts down,then flashes three times.
Program 6 (Blue color Ramp up and flash)
In this program,blue color brightens from 0%-100% and shuts down,then flashes three times.
Program 7 (Color Change+Flash)
Here several colors fade into each other and then flash randomly.
Program 8 (Fade in and Fade out)
Here different color fade into each other.
Program 9 (Strobe White )
Just white color flashes up.
Tips:
To dim all RGBW ghts at once or change the color ,first press "Master ON".Todo this with individual ghts .first press "Zone ON",Secondly,choose the color brightness or brightness according to the color ring or brightnessring.
>Linking & unnk the ght
Linking new ghts to the remoute control
1.Choose which zone you want to assign the ght (1 to 4)
2.Switch off the main power supply of the ght in the selected zone with the main switch or pull the plug from the socket.
3.Now switch on the ght again and within 3 seconds shortly press one of the "Zone ON" buttons one time on the remote conctrol.
4.When this nk operation is successful ,the ght slowly bnks 3 times on and off.
Unnking the ghts:
1.Check via the remote the control to see which zone (1 to 4) is already nked to a ght.
2. Switch off the main power supply of the ght with the main switch or pull the plug from the socket.
3.Now switch on the ght again within 3 seconds press 5 times quickly and shortly on one of the "Zone ON" buttons which you want to nk.
4.When this unnk operation is succesful,the ght quickly bnks 6 times on and off.
Grouping of several ghts
You can add an endless numbers of ghts to a zone on the 4 channel remote by nking the ghts to different zones.This way you are completely flexible in creating different group combinations .Below you can see some grouping examples.
Kind remind:
we recommend using rechargeable batteries for the remote controls.For that reason,we don't include ordinary batteries.We hope you appreciate our environmental friendly choices and they do not cause you any inconvenience.
Instruction:
Safety Guide:To reduce the risk of electric shock, please ensure the ght socket if turned off at the wall ght switch before replacing ght bulbs.
Bulb and Wireless Remote/App Installation:
1. Battery Installation:Please take the remote control and carefully press the battery cover and push it away in a downward motion.
2. App installation:Download and finish the installation of the iOS or Android App as per Wifi Controller User Installation
3. LED Bulb Installation:
·Take the led bulb out of the packaging, holding it only by the acryc lens.
·Switch off the power at the wall or lamp switch before installation.
·Replace the original ght bulb with the new Wireless Smart LED Bulb.
·Switch on the power, the led bulb will ght under normal circumstances.
·If the bulb does not sync, then firstly clear the previous channel as per Unnking the ghts (from the RGBW Remote Control User Instruction). - See more at: http://www.eachine.com/ThorFire-Touch-Remote-Control-Color-Changing-LED-Blub-RGBW-Dimmable-Light-Samsung-Chips-E27-6W%2850W%29-Model-G1-p-25.html?utm_design=13&utm_source=emailvision&utm_medium=Mail_eachine02_all&utm_campaign=newsletter&utm_content=Echo#sthash.zCvlR1P9.dpuf >Basic control functions(As shown on the right picture)
Long press "Master ON/ZONE ON" button,you can get the white mode.
Touch the color ring ,you can get any color
And you can change the brightness by the brightness ring+ -.
Programs:
Program 1 (RGB Fade In Fade Out )
This program fades in and fades out the color red ,green ,blu ,and white one after anther .
Program 2 (Color Flash )
In this program ,red ,green ,blue ,white ,yellow ,purple flashes to change .
Program 3 (Disco)
Different colors strobe and flash to change
Program 4 (Red color Ramp up and flash)
In this program ,red color brightens from 0%-100% and shuts down .then flashes three times.
Program 5 (Green color Ramp up and flash)
In this program,green color brightens from 0%-100% and shuts down,then flashes three times.
Program 6 (Blue color Ramp up and flash)
In this program,blue color brightens from 0%-100% and shuts down,then flashes three times.
Program 7 (Color Change+Flash)
Here several colors fade into each other and then flash randomly.
Program 8 (Fade in and Fade out)
Here different color fade into each other.
Program 9 (Strobe White )
Just white color flashes up.
Tips:
To dim all RGBW ghts at once or change the color ,first press "Master ON".Todo this with individual ghts .first press "Zone ON",Secondly,choose the color brightness or brightness according to the color ring or brightnessring.
>Linking & unnk the ght
Linking new ghts to the remoute control
1.Choose which zone you want to assign the ght (1 to 4)
2.Switch off the main power supply of the ght in the selected zone with the main switch or pull the plug from the socket.
3.Now switch on the ght again and within 3 seconds shortly press one of the "Zone ON" buttons one time on the remote conctrol.
4.When this nk operation is successful ,the ght slowly bnks 3 times on and off.
Unnking the ghts:
1.Check via the remote the control to see which zone (1 to 4) is already nked to a ght.
2. Switch off the main power supply of the ght with the main switch or pull the plug from the socket.
3.Now switch on the ght again within 3 seconds press 5 times quickly and shortly on one of the "Zone ON" buttons which you want to nk.
4.When this unnk operation is succesful,the ght quickly bnks 6 times on and off.
Grouping of several ghts
You can add an endless numbers of ghts to a zone on the 4 channel remote by nking the ghts to different zones.This way you are completely flexible in creating different group combinations .Below you can see some grouping examples.
Kind remind:
we recommend using rechargeable batteries for the remote controls.For that reason,we don't include ordinary batteries.We hope you appreciate our environmental friendly choices and they do not cause you any inconvenience.
Instruction:
Safety Guide:To reduce the risk of electric shock, please ensure the ght socket if turned off at the wall ght switch before replacing ght bulbs.
Bulb and Wireless Remote/App Installation:
1. Battery Installation:Please take the remote control and carefully press the battery cover and push it away in a downward motion.
2. App installation:Download and finish the installation of the iOS or Android App as per Wifi Controller User Installation
3. LED Bulb Installation:
·Take the led bulb out of the packaging, holding it only by the acryc lens.
·Switch off the power at the wall or lamp switch before installation.
·Replace the original ght bulb with the new Wireless Smart LED Bulb.
·Switch on the power, the led bulb will ght under normal circumstances.
·If the bulb does not sync, then firstly clear the previous channel as per Unnking the ghts (from the RGBW Remote Control User Instruction). - See more at: http://www.eachine.com/ThorFire-Touch-Remote-Control-Color-Changing-LED-Blub-RGBW-Dimmable-Light-Samsung-Chips-E27-6W%2850W%29-Model-G1-p-25.html?utm_design=13&utm_source=emailvision&utm_medium=Mail_eachine02_all&utm_campaign=newsletter&utm_content=Echo#sthash.zCvlR1P9.dpuf Instruction:
Safety Guide:To reduce the risk of electric shock, please ensure the ght socket if turned off at the wall ght switch before replacing ght bulbs.
·Take the led bulb out of the packaging, holding it only by the lens.
·Switch off the power at the wall or lamp switch before installation.
·Replace the original ght bulb with the new Wireless Smart LED Bulb.
·Switch on the power, the led bulb will ght under normal circumstances.
Package Included:
1 x 2.4G RF 6W RGBW LED Bulb (not included remote control)
Product Description
Packaging Details Unit
Type: piece
Package Weight: 0.200kg (0.44lb.)
Package Size: 15cm x 10cm x 10cm (5.91in x 3.94in x 3.94in)