Item specifics
Item
Type: Wall Lamps Usage: Holiday Switch
Type: Knob switch Light Source: Halogen Bulbs Style: Tiffany Is Bulbs Included: No Installation
Type: Wall Mounted Shade
Type: Stained Glass Certification: CCC,CE,FCC Is Dimmable: No Voltage: 90-260V Place of Origin: Guangdong, China (Mainland) Voltage: 110V, 220V, 230V, 240V



        Tools You Will Need: A ladder A pair of screwdrivers A pair of wire cutters Chandeer Replacement in 7 Steps Step 1: Locate the breaker box. Next, you will need to turn off the power at the breaker box. Be sure to double check that the power is off by turning on and off the ght switch. Step 2: Access Electrical Connections Place your ladder off to one side of the chandeer. Unscrew the ght canopy to access the electrical connections; there will either be one nut in the middle of the canopy or two screws on each side of the canopy. You may need an extra person to help assist in supporting the weight of the chandeer as only the electrical wires will be supporting your ght fixture. Step 3: Disconnect & Remove the Old Light Fixture Remove the wire nut electrical connectors from the wiring by twisting them counter clockwise. The ground wire may be screwed to the electrical box with a green screw; you will need to remove this. If another person is not assisting you, it will be safer to cut the wires on the ghting side of the wire nuts, lower the ght and then remove the connectors. Step 4: Preparation for New Chandeer Next, you need to prepare to hang the new chandeer. You may begin preparation by reading all of the manufacturer's instructions. The instructions will indicate how to put the chandeer ghting together, if it needs assembled. Step 5: Instalng the New Chandeer Now, you will need to raise the new chandeer and connect the wires. Again, you may need the assistance of an extra person. Make sure to use new wire nuts. You will need to make sure that there are no bare wires showing and that the wire nuts are securely fastened. Remember to re-attach the ground wire screw and ground wire. Step 6: Final Checks You will need to tuck the wires into the electrical box and fasten the canopy according to the manufacturer's detailed instructions. You will need to make sure everything is secure. Step 7: Turn the Power On Turn the power back on at the breaker box and make sure everything is working properly. Now you're ready to clean up and discard your old chandeer.    
Product Description
Packaging Details Unit
Type: piece
Package Weight: 2.000kg (4.41lb.)
Package Size: 60cm x 30cm x 40cm (23.62in x 11.81in x 15.75in)